Rugged GPGPU Computer with NVIDIA 640-CUDA cores


The SD-7RP95GPU is a High Performance Embedded Computer (HPEC) based on NVIDIA Maxwell GPU Architecture.
The power of the GeForce GTX 950M delivers unsurpassed graphics, video, and GPU computing performance, with access to 640 NVIDIA CUDA™ cores. It is an ideal solution for performance driven systems such as defense and military/aerospace applications.

• NVIDIA® GeForce™ GTX 950M (640 CUDA Cores)
• Intel® 6th Generation Core™ / Xeon® E3 v5 Family Processor
• Up to 32GB dual channel ECC DDR4 at 2133 MHz
• 4x Independent video outputs ,DisplayPort/HDMI/DVI (Output selection by request)
• Up to 2TB Solid State Storage in removable canister with rugged SATA connector
• 2 x Gigabit Ethernet LAN Interfaces (10/100/1000Mbps)
• 2 x RS232, 2 x RS422/RS485
• 4x USB v. 3.0 and 4x USB 2.0
• All I/O ports through MIL 38999 Connectors
• Remote power on/off and reset whole system option
• Wide operating temperature -35 to +65°C
• DVI/HDMI , HD-SDI and 4 x Composite inputs (Optional)
• Full IP67 water dust proof, anti-corrosion housing
• Windows™ and Linux Support


Processor & RAM

  • Intel® 6th Gen.  Xeon® E3 v5 Family E3-1505L v5 Processor
  • DDR4-2133 up to 32GB ECC


  • NVIDIA® GeForce™ GTX 1050Ti  (768 CUDA Cores)

Video Input

  • 4x Independent DisplayPort /HDMI /DVI outputs (Output selection by request)

Network interface

  • 2x Gigabit Ethernet      
  • miniPCIe slot for optional WiFi or 4G Modem

Remote Control

  • Remote control via serial port to turn on/off the power or reset the whole system


  • Up to 2TB Solid State Storage in removable canister with rugged SATA connector

Power Requirements:

  • Wide range input +18V to +36V DC
  • Reverse polarity protection. Overload protection and transient voltage suppression


  • Full IP67 water dust proof, anti-corrosion housing
  • Operating temperature: -35ºC to +65ºC
  • Storage temperature : -40°C to 80°C
  • Operational Altitude (20,000ft) MIL-STD-810G, Method 500.5, Procedure II.
  • Humidity: MIL-STD-810G, Method 507.5, and Procedure II.
  • Sand and Dust: MIL-STD-810G, Method 510.5 Procedure I (Dust) & II (Sand).
  • Fungus: MIL-STD-810G, Method 508.6.
  • Vibration: MIL-STD-810G method 514.6, procedure I.
  • Mechanical Shock: MIL-STD-810G, Method 516.6 Procedure I & V.
  • EMC /EMI : MIL-STD-461F CE101,CE102, CS101, CS114, CS116, RE101,RE102.